Download all six sections with measurement diagrams. The PDF contains no photo.
Report ID sample · Method version 0.1
Look a little closer
Eye features
The gap between the inner corners is wider than one eye in this photo. The outer eye corners angle upward.
Inner-corner gap / average eye width
1.40×
Eye corner direction
Upturned
Left outer-corner tilt
+3.8°
Right outer-corner tilt
+4.6°
Inner-corner gap
1.40×
Average eye width
1.00×
Your left outer corner
+3.8°
Your right outer corner
+4.6°
Each width pair uses one scale. Tilt is in degrees from the leveled eye line. Positive angles rise toward the outside. Left and right are yours.
Try a camera at eye level and look straight ahead to compare how the corners read in another photo.
Face outline
The lower outline narrows toward the chin. The face appears longer from top to bottom in this photo. Cheek width is the reference for both comparisons. Height runs from the upper forehead point to the chin.
Lower outline / cheek width
0.74×
Face height / cheek width
1.48×
Lower outline
0.74×
Cheek width
1.00×
Face height
1.48×
Cheek width
1.00×
Each pair compares two lengths on the same scale. A missing comparison has no line.
Feature placement
The nose base and lip center sit close to the line between the eyes. The nose base sits below the midpoint from the eyes to the chin. The first figure averages how far the nose base and lip center sit from the center line. The second shows how far down the nose base lands.
Average offset / eye-center span
1.92%
Eye line to nose base / eye line to chin
56.60%
Average sideways offset
1.92%
Eye-center span
100.00%
Eye line to nose base
56.60%
Eye line to chin
100.00%
The first pair measures sideways and the second measures downward. Each pair has its own reference length.
Left-to-right balance
The eye openings show the largest left-to-right difference in this photo. Each difference is measured against the average of the two sides. The three differences are then averaged for the balance reading.
Eye width difference
4.00%
Eye opening difference
10.00%
Mouth half difference
4.00%
Average difference
6.00%
Eye width · left
98.00%
Eye width · right
102.00%
Eye opening · left
105.00%
Eye opening · right
95.00%
Mouth half · left
98.00%
Mouth half · right
102.00%
Left and right are yours. In each pair, 100% is the average of both sides. Eye openings use upper-to-lower lid distance. Mouth halves run from lip center to corner.
Lip shape
The visible lip surfaces look fuller relative to the mouth width. We add the visible upper and lower lip heights and compare them with the distance between the mouth corners.
Visible lip height / mouth width
0.28×
Combined lip height
0.28×
Mouth width
1.00×
The lip-height line combines both lips. Mouth width is the reference.
Signature & styling
A tapered outline, a longer shape and upturned outer eye corners. The card brings together the lower outline, the height compared with the cheeks, and the way the outer eye corners sit.
Lower outline
Tapered
Face height relative to width
Long
Outer eye corners
Upturned
The Sleek Lift
Three features contribute to the signature. A named combination uses all three readings.
Try a wider portrait crop with extra space above the forehead and below the chin to frame the longer shape.
Try turning slightly toward a window to see how soft side light traces the taper toward your chin.
Try a close eye-level portrait with soft light across both outer corners to bring out the upward angle.
How we read this photo
The PSL score uses four readings from one photo. Left-to-right balance counts for 30%, distance from center for 20%, vertical placement for 25% and eye spacing for 25%. The outline, face length, eye corner direction and lip shape add context to the report. Camera angle and expression can change the readings. Made for fun.